移機人員上門拆機并帶齊全套工具
前期準備:移機人員上門拆機并帶齊全套工具、材料及安全設備。免費檢查，先報價，后維修，不維修不收取任何費用等優惠政策，徹底根除了消費者的后顧之憂，肅清了游離在行業邊緣的"螺絲刀加工廠"，保護了消費者的利益，同時也給足了消費者的選擇權，真正做到了客戶才是上帝。
1. Preliminary preparation: the relocation personnel shall dismantle the
machine on site and bring a complete set of tools, materials and safety
equipment. Free inspection, first quotation, then maintenance, no
maintenance, no charge and other preferential policies have completely
eradicated the worries of consumers, eliminated the "screwdriver
processing factory" on the edge of the industry, protected the interests
of consumers, and gave consumers the right to choose. The customer is
the God.
2、回收制冷劑:首先開機制冷，外機運行后收氟關閉小閥門，閥門結霜有化掉后關閉大閥門，立刻關機。拉掉電源，擰緊保險帽，使空調移機器中的制冷劑收集到室外機中去。
2. Recovery of refrigerant: start up the refrigerator first, collect
fluorine after the external machine runs, close the small valve, close
the large valve after the valve frosts and melts, and shut down
immediately. Pull off the power supply and tighten the safety cap to
collect the refrigerant in the air conditioner into the outdoor unit.
3、拆室內機:拆卸室內機時，應防止冷凝水流進線路板。
3. Disassemble the indoor unit: when disassembling the indoor unit, prevent condensate from flowing into the circuit board.
4、拆室外機:拆卸室外機時，在卸放的同時注意平衡避免振動搖晃，用塑料包好以便搬運。
4. Disassembly of outdoor unit: when disassembling the outdoor unit, pay
attention to balance during unloading, avoid vibration and shaking, and
wrap it with plastic for handling.
5、安裝:空調重新安裝時應注意安裝位置與對流。用洗滌劑進行檢漏，觀察每一個接頭有無氣泡冒出，驗明系統確無泄漏后，旋緊閥門保險帽即可。
5. Installation: pay attention to the installation position and
convection when reinstalling the air conditioner. Conduct leak detection
with detergent, observe whether there are bubbles at each joint, and
tighten the valve safety cap after verifying that the system has no
leakage.
